1
Configure Cisco Call Manger Express in 10 step
Posted by
Marc_kamel
,
25 August 2010
·
0 views
Cisco CallManager Express Configuration
Requirements
Ensure that you meet these requirements before you attempt this configuration:
Install the appropriate hardware.
Download and install appropriate Cisco IOS® software.
Download Cisco Unified CallManager Express software.
Download Cisco Unity Express software.
Components Used
The information in this document is based on these software and hardware versions:
Cisco 3725 Router on Cisco IOS Software Release 12.4(9)T
Cisco Catalyst 3550 Switch on Cisco IOS Software Release 12.1
Cisco IP 7960 Phone
Cisco Unified CallManager Express 4.0
Cisco Unity Express 2.2.2
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Configure
In this section, you are presented with the information in order to configure the features described in this document.
Note: Use the Command Lookup Tool ( registered customers only) in order to obtain more information on the commands used in this section.
Network Diagram
This document uses this network setup:
i will contune later
Requirements
Ensure that you meet these requirements before you attempt this configuration:
Install the appropriate hardware.
Download and install appropriate Cisco IOS® software.
Download Cisco Unified CallManager Express software.
Download Cisco Unity Express software.
Components Used
The information in this document is based on these software and hardware versions:
Cisco 3725 Router on Cisco IOS Software Release 12.4(9)T
Cisco Catalyst 3550 Switch on Cisco IOS Software Release 12.1
Cisco IP 7960 Phone
Cisco Unified CallManager Express 4.0
Cisco Unity Express 2.2.2
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Configure
In this section, you are presented with the information in order to configure the features described in this document.
Note: Use the Command Lookup Tool ( registered customers only) in order to obtain more information on the commands used in this section.
Network Diagram
This document uses this network setup:
i will contune later
