Jump to content


13

MSSK's Blog



Photo

MPLS L3VPN with PPPoE

Posted by MSSK , 14 January 2014 - * * * * * · 19,590 views

MPLS L3VPN with PPPoE In this example we will configure MPLS L3VPN between two sites but, one of the CEs is connected via normal Ethernet connection and the other one is connected via PPPoE
OSPF will be the PE-CE routing protocol and ISIS level-2 will be the operating IGP inside the MPLS backbone, area 49.0001 is in use
MPLS backbone will be located in AS...


Photo

DMVPN with EIGRP

Posted by MSSK , 08 December 2013 - * * * * * · 19,800 views

DMVPN with EIGRP Elements

We are going to configure DMVPN with EIGRP as the connecting routing protocol between the hub and the spokes
Our Hub will R1 and the spokes will be R2 and...


Photo

BGP redistribute-internal

Posted by MSSK , 02 December 2013 - * * * * * · 19,584 views

BGP redistribute-internal Elements

In this example we will examine a hidden command: bgp redistribute-internal
R1 is running OSPF with R2, iBGP with R3 (EIGRP is for loopbacks connectivity) and eBGP with...


Photo

IPv6 Routing Example #1

Posted by MSSK , 09 October 2013 - * * * * * · 12,467 views

IPv6 Routing Example #1 R1
interface Loopback0
ipv6 address 2001::1/128
ipv6 ospf 1 area 0

[font=lucida sans unicode,lucida...


Photo

BGP Configuration Example #2

Posted by MSSK , 06 October 2013 - - - - - - · 11,848 views

BGP Configuration Example #2 Interfaces
R1:
Lo0: 1.1.1.1/32, Lo1: 192.168.1.1/24, Lo2: 192.168.11.1/24, Lo3 192.168.111.1/24

[font=lucida...


Photo

IPSEC site to site

Posted by MSSK , 16 September 2013 - - - - - - · 11,571 views

IPSEC site to site Issue

In this example we will configure IPSEC site to site VPN between R1 and R5 to gain connectivity between SW1 LAN and SW2 LAN , as well the simulation involved BGP peering in order to practice BGP relations and attributes

Configuration

R1
hostname R1

interface Loopback0
ip address 62.215.1.1...


Photo

MPLS L3VPN JC RIP

Posted by MSSK , 28 August 2013 - - - - - - · 2,805 views

MPLS L3VPN JC RIP Issue

In this example we will configure MPLS L3VPN between two sites but one of the PE routers will be Cisco and the other one will be Juniper
RIP Version 2 will be the PE-CE routing protocol and OSPF will be the operating IGP inside the MPLS backbone, area 0 is in use
MPLS backbone will be located in AS...


Photo

MPLS L3VPN JC Static

Posted by MSSK , 20 August 2013 - - - - - - · 2,821 views

MPLS L3VPN JC Static Issue

In this example we will configure MPLS L3VPN between two sites but one of the PE routers will be Cisco and the other one will be Juniper
Static routing will be the PE-CE routing protocol and OSPF will be the operating IGP inside the MPLS backbone, area 0 is in use
MPLS backbone will be located in AS...


Photo

MPLS QoS Part #2

Posted by MSSK , 26 July 2013 - - - - - - · 2,762 views

MPLS QoS Part #2 Now, let us choose three applications: TELNET, TFTP and ICMP
We will configure CE routers to assign these applications precedence values as they are leaving toward the MPLS backbone
...


Photo

MPLS QoS Part #1

Posted by MSSK , 26 July 2013 - - - - - - · 2,651 views

Elements

We are going to examine QoS configuration through our MPLS backbone and across the L3VPN connection implemented to maintain connectivity between site #1(R4, R6) and site #2 (R5, R7)
[font=lucida sans unicode,lucida...






November 2017

S M T W T F S
   1234
567891011
12131415161718
19 20 2122232425
2627282930  

Recent Entries

Recent Comments

Tags

    Search My Blog

    Categories

    Organization

    Community

    Downloads

    Test Providers

    Site Info


    Go to top