Jump to content


0
[Offer]

Bowler CBT Labs – Juniper Series 1 – Quality Training



21 replies to this topic

#1 sfarmy

sfarmy

    Newbie

  • Members
  • Pip
  • 0 posts
  • 20388 thanks

Posted 05 August 2012 - 04:28 PM

Bowler CBT Labs - Juniper Series 1

English | Duration: 11.5h | H264 | 1020x768 | 15fps 333kbps | AAC 44.1KHz | 1.37GB
Genre: eLearning

Are you studying for Juniper Certifications? Are you just looking to brush up your skills on Juniper routers and looking for some good lab tutorial videos? Then these videos are for you. Over 1 Gig of Video Training in .MP4 file format presented on 1 DVD. 20 total videos and over 11 1/2 hours of High Quality in depth training based solely around Lab Tutorials in which we configure/troubleshoot and verify in a step-by-step easy to follow and understand method.

These labs are based strictly around configuring routers using the Juniper Command Line Interface (CLI) and are accompanied by easy to follow network topologies designed by myself. There are no “theory” based videos. Studies have proven that “hands on” training is the best and most efficient way to learn and that is strictly what I offer. So sit back, relax, start up your routers and prepare to join me and prepare yourself for hours upon hours of “hands on” training.

20 total videos which are listed below:
Introduction to Juniper Lab 1
Total Runtime: 53 Minutes
In this video I configure and explain the following:

-JUNOS Basics
-How to navigate the different CLI Modes
-Candidate vs. active configuration
-Show how to use the commit command
-Show how to use the rollback command
-System hostname and system time

Introduction to Juniper Lab 2
Total Runtime: 42 Minutes
In this video I configure and explain the following:

-Basic configuration of physical and loopback interfaces
-Difference between deactivating and disabling an interface
-Explain the concept of a “unit” and “family”
-Add a description to an interface
-Add an IPv4 and an IPv6 address to an interface
-Perform show commands for verification

Introduction to Juniper Lab 3
Total Runtime: 32 Minutes
In this video I configure and explain the following:

-Configure a point to point link between a Cisco and Juniper router
-Show how to use the ping command and some of its options
-Show how to use the monitor command and some of its options

Introduction to Juniper Lab 4
Total Runtime: 37 Minutes
In this video I configure and explain the following:

-Commonly used show commands (Comparing Juniper to Cisco)

Introduction to Juniper Series 1
Total Runtime: 8 Minutes
In this video I explain the following:

-Welcome to Juniper Series 1!
-The order in which to view the videos
-Talk about the Juniper Networks Certification Program (JNCP)
-Junipers growing presence in the networking industry

Introduction to J-Web
Total Runtime: 33 Minutes
In this video I configure and explain the following:

-How to manage and maintain your Juniper device via J-Web
-How to access your Juniper device via J-Web
-Perform basic routing protocol administration
-Perform basic monitoring of interfaces
-How to navigate the J-Web

Juniper Border Gateway Protocol (BGP) Lab 1
Total Runtime: 46 Minutes
In this video I configure and explain the following:

-The basic principles of EBGP and why you would use EBGP
-External BGP (EBGP)
-Use show commands to verify proper EBGP operation
-Advertise networks into EBGP

Juniper Border Gateway Protocol (BGP) Lab 2
Total Runtime: 46 Minutes
In this video I configure and explain the following:

-The basic principles of IBGP and why you would use IBGP
-Internal BGP (IBGP)
-Use show commands to verify proper IBGP operation
-BGP Authentication
-IBGP best practices

Juniper Default Routing Lab 1
Total Runtime: 27 Minutes
In this video I configure and explain the following:

-How to create default routes
-Use show commands to verify proper default routing operation
-Explain why and in what situations you would use default routing

Juniper Firewall Filter Lab 1
Total Runtime: 46 Minutes
In this video I configure and explain the following:

-How to create a basic firewall filter
-How to use a term within a firewall filter
-Use proper show commands and test connectivity to verify proper firewall filter implementation
-Explain the basics of firewall filters and why they are used

Juniper Firewall Filter Lab 2
Total Runtime: 35 Minutes
In this video I configure and explain the following:

-How to count and log traffic on an interface
-Use proper show commands and testing to verify that the firewall filter counters and logging is being implemented correctly

Juniper Logical Systems Lab 1
Total Runtime: 27 Minutes
In this video I configure and explain the following:

-What is a logical system and why use them?
-How to use the LT interface option when connecting logical systems

Juniper Logical Systems Lab 2
Total Runtime: 25 Minutes
In this video I configure and explain the following:

-How to use the EM interface option when connecting logical systems

Juniper Open Shortest Path First (OSPF) Lab 1
Total Runtime: 30 Minutes
In this video I configure and explain the following:

-Single area OSPF
-Basic principles of the OSPF Routing protocol
-DR/BDR election process
-Use show command to verify proper single area OSPF operation
-How to advertise networks into OSPF

Juniper Open Shortest Path First (OSPF) Lab 2
Total Runtime: 26 Minutes
In this video I configure and explain the following:

-Multiple area OSPF
-Area Border Router (ABR) Operation
-Use show commands to verify proper multi area OSPF operation
-How to advertise networks into OSPF

Juniper Routing Information Protocol (RIPv2) Lab 1
Total Runtime: 58 Minutes
In this video I configure and explain the following:

-The basic principles RIPv2
-How to manipulate the RIP metric for proper traffic flow
-Use show commands to verify proper RIPv2 operation
-How to advertise networks into RIPv2

Juniper Routing Policy Lab 1
Total Runtime: 52 Minutes
In this video I configure and explain the following:

-How to setup a basic Routing Policy
-What a term is and what it is used for
-Match conditions
-Action conditions
-Similarities between Juniper Routing Policies and Cisco Route Maps
-Import and Export Policies

Juniper Static Routing Lab
Total Runtime: 37 Minutes
In this video I configure and explain the following:

-How to create static routes
-Use show commands to verify proper static routing operation
-Explain the routing table and route preference

JUNOS Configuration Basics Lab 1
Total Runtime: 27
In this video I configure and explain the following:

-Basic user access and banner configuration
-How to create and manage user accounts
-How to create the message and announcement banners

Traceoptions Lab 1
Total Runtime: 25 Minutes
In this video I configure and explain the following:

-Basic traceoption functions
-How traceoptions are similar to Cisco debugs
-How to create traceoption files and flags and view the output of traceoption files

More info:
_http://www.bowlercbtlabs.com/products/juniper-lab-cbt-video-series-1


[letitbit.net]
Hidden Content
You'll be able to see the hidden content once you press the thanks button.

[downloadline.net]
http://downloadine.net/dl/523MYDZT0W/52193.5e0a221afebd94fc406cb1de3551/sevno.info_Bowler_CBT_Labs_-_Juniper_Series_1.part1.rar.html
http://downloadine.net/dl/SUD85X2MZ3/77697.7a4a7c71fcb7152609e6b345e2bf/sevno.info_Bowler_CBT_Labs_-_Juniper_Series_1.part2.rar.html
http://downloadine.net/dl/S87F149Y6G/89690.835cec1aa709784a351a4842fc60/sevno.info_Bowler_CBT_Labs_-_Juniper_Series_1.part3.rar.html

Edited by sfarmy, 01 September 2012 - 01:54 AM.
Please hide your links


Thanked by 445 Members:

#2 learningcisco

learningcisco

    Advanced Member

  • Members
  • PipPipPip
  • 259 posts
  • 502 thanks

Posted 05 August 2012 - 04:56 PM

Do you have series2? If you have please share it.

Thanked by 2 Members:
hattou amine , hsyah

#3 crackerjoe69

crackerjoe69

    Geek

  • Senior Super Moderators
  • 4,573 posts
  • 27738 thanks

Posted 06 August 2012 - 11:08 AM

Do not post useless "thank you" post.

If you want to see the content of the hidden links
Please use the "Thanks" button as shown in the announcements
http://certcollection.org/forum/topic/99091-new-feature-added/
Posting an answer will NOT reveal the hidden content.

All following useless "thank you" will be removed.

Do not post useless "Thank You"s in the share subforums @ http://certcollection.org/forum/forum/1-training-offers-requests/.

Use the "Thanks" button to see the hidden contents in the share section as shown in the announcements

http://certcollection.org/forum/topic/99091-new-feature-added/

WARNING: Strict action will be taken against members posting Thank yous(tnx, great, gr8, 10x, +1), unnecessary quotes, posts with gibberish words and smileys without any comments. 1st Warning will lead to 4hrs disabled posting , 2nd will lead to 12 hrs, 3rd & 4th might lead to 1, 3 or 7 days of disabled posting . Please note further, that ignoring this hint will lead into more restrictive actions.

Thanked by 4 Members:
wildragonx , maxpang , adibudi , shuja123456

#4 sfarmy

sfarmy

    Newbie

  • Members
  • Pip
  • 0 posts
  • 20388 thanks

Posted 06 August 2012 - 03:57 PM

You can download it free mode. All links are working

Thanked by 1 Member:
shuja123456

#5 marshal007

marshal007

    Junior Member

  • Members
  • PipPip
  • 7 posts
  • 1471 thanks

Posted 07 August 2012 - 02:19 PM

Links not working.

#6 jeges

jeges

    The Rocket

  • Honorary members
  • PipPipPip
  • 478 posts
  • 33460 thanks
  • Locationinside your brain

Posted 07 August 2012 - 02:28 PM

View Postmarshal007, on 07 August 2012 - 02:19 PM, said:

Links not working.
confirmed, no available links

#7 venkateshreddy

venkateshreddy

    Newbie

  • Members
  • Pip
  • 0 posts
  • 123 thanks

Posted 09 August 2012 - 05:56 PM

Links are dead

#8 sfarmy

sfarmy

    Newbie

  • Members
  • Pip
  • 0 posts
  • 20388 thanks

Posted 10 August 2012 - 01:00 AM

check links again its working

Thanked by 1 Member:
jeges

#9 itech

itech

    Member

  • Members
  • PipPip
  • 11 posts
  • 43 thanks

Posted 11 August 2012 - 10:39 PM

How about  Series 2??

#10 adibudi

adibudi

    Newbie

  • Members
  • Pip
  • 0 posts
  • 57 thanks

Posted 17 August 2012 - 01:21 PM

I can not download it
having to pay

Please help to put the file on 4shared.com

thank you

#11 ciscochampions

ciscochampions

    Member

  • Members
  • PipPip
  • 47 posts
  • 26 thanks

Posted 28 August 2012 - 02:13 PM

unable to dowbload bowler CBT's
says file not fount
extabit is paid :(

#12 zmalik

zmalik

    Member

  • Members
  • PipPip
  • 23 posts
  • 38 thanks

Posted 05 September 2012 - 04:35 AM

I am not sure how to download them, it is asking to register and use my credit card.  Please advise if those links are still valid.

#13 fofoman

fofoman

    Member

  • Members
  • PipPip
  • 21 posts
  • 267 thanks

Posted 05 September 2012 - 05:52 AM

This is greet vedio please we need Bowler CBT Labs - Juniper Series 2 ??

#14 rafnex

rafnex

    Junior Member

  • Members
  • PipPip
  • 2 posts
  • 211 thanks

Posted 14 September 2012 - 09:34 AM

please reupload on other sharing sites like mediafire. :mellow:




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Organization

Community

Downloads

Test Providers

Site Info


Go to top