Jump to content


1

H1 LAB | BGP neighbors in AS 34567


6 replies to this topic

#1 anchal3yadav

anchal3yadav

    Advanced Member

  • Members
  • PipPipPip
  • 122 posts
  • 64 thanks
  • LocationInternet....

Posted 16 April 2018 - 06:58 PM

Hello Members!,

Currently i started my preparation in EVE on H1 LAB (SPOTO) , but i stucked in BGP configuration of AS 34567 as attached screen shot.

Please suggest me configuration on switches , and i have added boot images as mentioned below








BGP neigh fails between R8 -> R10 &R11
==============================
R8#show ip bgp summary
BGP router identifier 123.8.8.8, local AS number 34567
BGP table version is 1, main routing table version 1

Neighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
123.9.9.9       4        34567       9       9        1    0    0 00:05:57        0
123.10.10.10    4        34567       0       0        1    0    0 never    Idle
123.11.11.11    4        34567       0       0        1    0    0 never    Idle
R8#

--------------------------------------------------------------------------------------------------------------------



R9#sho ip bgp summary
BGP router identifier 123.9.9.9, local AS number 34567
BGP table version is 1, main routing table version 1

Neighbor        V           AS MsgRcvd MsgSent   TblVer  InQ OutQ Up/Down  State/PfxRcd
123.8.8.8       4        34567      10       9        1    0    0 00:06:36        0
123.10.10.10    4        34567       0       0        1    0    0 never    Idle
123.11.11.11    4        34567       0       0        1    0    0 never    Idle
R9#


Switch Boot image version  L2-ADVENTERPRISEK9-M-15.2-IRON-20151103.bin
Router Boot Image version  L3-ADVENTERPRISEK9-M-15.4-2T.bin

Attached Files



#2 cciesphere

cciesphere

    Member

  • Members
  • PipPip
  • 16 posts
  • 1236 thanks

Posted 17 April 2018 - 10:38 AM

Just a silly question.. Did you unshut vlan's?

Cheers

#3 ambikana

ambikana

    Junior Member

  • Members
  • PipPip
  • 7 posts
  • 2 thanks

Posted 17 April 2018 - 10:42 AM

lol

#4 anchal3yadav

anchal3yadav

    Advanced Member

  • Members
  • PipPipPip
  • 122 posts
  • 64 thanks
  • LocationInternet....

Posted 17 April 2018 - 07:45 PM

yes , L3vlan  are up..


Loopback0              123.203.3.3     YES NVRAM  up                    up
Vlan34                 123.10.2.13     YES NVRAM  up                    up
Vlan38                 123.10.2.6      YES NVRAM  up                    up
Vlan310                123.10.2.17     YES NVRAM  up                    up
SW3#




Loopback0              123.204.4.4     YES NVRAM  up                    up
Vlan34                 123.10.2.14     YES NVRAM  up                    up
Vlan49                 123.10.2.10     YES NVRAM  up                    up
Vlan411                123.10.2.21     YES NVRAM  up                    up
SW4#


able to get routes , but not reachable .. its dropping on switch ... is there any particular switch IOS version ? or could you please share some initial configuration of H1 lab.

R8#sho ip route ei
R8#sho ip route eigrp
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override

Gateway of last resort is not set

      123.0.0.0/8 is variably subnetted, 15 subnets, 2 masks
D        123.9.9.9/32 [90/409600] via 123.10.2.2, 00:05:03, Ethernet0/1
D        123.10.2.8/30 [90/307200] via 123.10.2.2, 00:05:03, Ethernet0/1
D        123.10.2.12/30 [90/307200] via 123.10.2.6, 00:04:59, Ethernet0/2
D        123.10.2.16/30 [90/281856] via 123.10.2.6, 00:04:59, Ethernet0/2
D        123.10.2.20/30 [90/307456] via 123.10.2.6, 00:05:03, Ethernet0/2
                        [90/307456] via 123.10.2.2, 00:05:03, Ethernet0/1
D        123.10.2.24/30 [90/307456] via 123.10.2.6, 00:05:24, Ethernet0/2
D        123.10.10.10/32 [90/409856] via 123.10.2.6, 00:04:59, Ethernet0/2
D        123.11.11.11/32 [90/435456] via 123.10.2.6, 00:05:03, Ethernet0/2
                         [90/435456] via 123.10.2.2, 00:05:03, Ethernet0/1
D        123.203.3.3/32 [90/409600] via 123.10.2.6, 00:04:59, Ethernet0/2
D        123.204.4.4/32 [90/435200] via 123.10.2.6, 00:05:03, Ethernet0/2
                        [90/435200] via 123.10.2.2, 00:05:03, Ethernet0/1
R8#ping  123.10.10.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 123.10.10.10, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)
R8#

#5 cyberdude121

cyberdude121

    Member

  • Members
  • PipPip
  • 16 posts
  • 15 thanks

Posted 18 April 2018 - 04:16 AM

Which IOS are you using ? Just Verify and If you are using advanced enterprise edition , you just disable ip cef on both switches .
SW3 &SW4

                 conf t # no ip cef

Thanked by 2 Members:
anchal3yadav , abuhashem

#6 anchal3yadav

anchal3yadav

    Advanced Member

  • Members
  • PipPipPip
  • 122 posts
  • 64 thanks
  • LocationInternet....

Posted 18 April 2018 - 06:26 PM

Thanks  

cyberdude121



conf t # no ip cef   This works

#7 akumetsu

akumetsu

    Junior Member

  • Members
  • PipPip
  • 4 posts
  • 1 thanks

Posted 19 April 2018 - 12:15 AM

Hello,

Anyone have spoto ccie rs lab to share or doing a group for buy that information?

Waiting for your comments.

Best Regards.




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

Organization

Community

Downloads

Test Providers

Site Info


Go to top