Jump to content
Sign in to follow this  
sfarmy

Bowler CBT Labs – Juniper Series 1 – Quality Training

Recommended Posts

Bowler CBT Labs - Juniper Series 1

 

English | Duration: 11.5h | H264 | 1020x768 | 15fps 333kbps | AAC 44.1KHz | 1.37GB

Genre: eLearning

 

Are you studying for Juniper Certifications? Are you just looking to brush up your skills on Juniper routers and looking for some good lab tutorial videos? Then these videos are for you. Over 1 Gig of Video Training in .MP4 file format presented on 1 DVD. 20 total videos and over 11 1/2 hours of High Quality in depth training based solely around Lab Tutorials in which we configure/troubleshoot and verify in a step-by-step easy to follow and understand method.

 

These labs are based strictly around configuring routers using the Juniper Command Line Interface (CLI) and are accompanied by easy to follow network topologies designed by myself. There are no “theory” based videos. Studies have proven that “hands on” training is the best and most efficient way to learn and that is strictly what I offer. So sit back, relax, start up your routers and prepare to join me and prepare yourself for hours upon hours of “hands on” training.

 

20 total videos which are listed below:

Introduction to Juniper Lab 1

Total Runtime: 53 Minutes

In this video I configure and explain the following:

 

-JUNOS Basics

-How to navigate the different CLI Modes

-Candidate vs. active configuration

-Show how to use the commit command

-Show how to use the rollback command

-System hostname and system time

 

Introduction to Juniper Lab 2

Total Runtime: 42 Minutes

In this video I configure and explain the following:

 

-Basic configuration of physical and loopback interfaces

-Difference between deactivating and disabling an interface

-Explain the concept of a “unit” and “family”

-Add a description to an interface

-Add an IPv4 and an IPv6 address to an interface

-Perform show commands for verification

 

Introduction to Juniper Lab 3

Total Runtime: 32 Minutes

In this video I configure and explain the following:

 

-Configure a point to point link between a Cisco and Juniper router

-Show how to use the ping command and some of its options

-Show how to use the monitor command and some of its options

 

Introduction to Juniper Lab 4

Total Runtime: 37 Minutes

In this video I configure and explain the following:

 

-Commonly used show commands (Comparing Juniper to Cisco)

 

Introduction to Juniper Series 1

Total Runtime: 8 Minutes

In this video I explain the following:

 

-Welcome to Juniper Series 1!

-The order in which to view the videos

-Talk about the Juniper Networks Certification Program (JNCP)

-Junipers growing presence in the networking industry

 

Introduction to J-Web

Total Runtime: 33 Minutes

In this video I configure and explain the following:

 

-How to manage and maintain your Juniper device via J-Web

-How to access your Juniper device via J-Web

-Perform basic routing protocol administration

-Perform basic monitoring of interfaces

-How to navigate the J-Web

 

Juniper Border Gateway Protocol (BGP) Lab 1

Total Runtime: 46 Minutes

In this video I configure and explain the following:

 

-The basic principles of EBGP and why you would use EBGP

-External BGP (EBGP)

-Use show commands to verify proper EBGP operation

-Advertise networks into EBGP

 

Juniper Border Gateway Protocol (BGP) Lab 2

Total Runtime: 46 Minutes

In this video I configure and explain the following:

 

-The basic principles of IBGP and why you would use IBGP

-Internal BGP (IBGP)

-Use show commands to verify proper IBGP operation

-BGP Authentication

-IBGP best practices

 

Juniper Default Routing Lab 1

Total Runtime: 27 Minutes

In this video I configure and explain the following:

 

-How to create default routes

-Use show commands to verify proper default routing operation

-Explain why and in what situations you would use default routing

 

Juniper Firewall Filter Lab 1

Total Runtime: 46 Minutes

In this video I configure and explain the following:

 

-How to create a basic firewall filter

-How to use a term within a firewall filter

-Use proper show commands and test connectivity to verify proper firewall filter implementation

-Explain the basics of firewall filters and why they are used

 

Juniper Firewall Filter Lab 2

Total Runtime: 35 Minutes

In this video I configure and explain the following:

 

-How to count and log traffic on an interface

-Use proper show commands and testing to verify that the firewall filter counters and logging is being implemented correctly

 

Juniper Logical Systems Lab 1

Total Runtime: 27 Minutes

In this video I configure and explain the following:

 

-What is a logical system and why use them?

-How to use the LT interface option when connecting logical systems

 

Juniper Logical Systems Lab 2

Total Runtime: 25 Minutes

In this video I configure and explain the following:

 

-How to use the EM interface option when connecting logical systems

 

Juniper Open Shortest Path First (OSPF) Lab 1

Total Runtime: 30 Minutes

In this video I configure and explain the following:

 

-Single area OSPF

-Basic principles of the OSPF Routing protocol

-DR/BDR election process

-Use show command to verify proper single area OSPF operation

-How to advertise networks into OSPF

 

Juniper Open Shortest Path First (OSPF) Lab 2

Total Runtime: 26 Minutes

In this video I configure and explain the following:

 

-Multiple area OSPF

-Area Border Router (ABR) Operation

-Use show commands to verify proper multi area OSPF operation

-How to advertise networks into OSPF

 

Juniper Routing Information Protocol (RIPv2) Lab 1

Total Runtime: 58 Minutes

In this video I configure and explain the following:

 

-The basic principles RIPv2

-How to manipulate the RIP metric for proper traffic flow

-Use show commands to verify proper RIPv2 operation

-How to advertise networks into RIPv2

 

Juniper Routing Policy Lab 1

Total Runtime: 52 Minutes

In this video I configure and explain the following:

 

-How to setup a basic Routing Policy

-What a term is and what it is used for

-Match conditions

-Action conditions

-Similarities between Juniper Routing Policies and Cisco Route Maps

-Import and Export Policies

 

Juniper Static Routing Lab

Total Runtime: 37 Minutes

In this video I configure and explain the following:

 

-How to create static routes

-Use show commands to verify proper static routing operation

-Explain the routing table and route preference

 

JUNOS Configuration Basics Lab 1

Total Runtime: 27

In this video I configure and explain the following:

 

-Basic user access and banner configuration

-How to create and manage user accounts

-How to create the message and announcement banners

 

Traceoptions Lab 1

Total Runtime: 25 Minutes

In this video I configure and explain the following:

 

-Basic traceoption functions

-How traceoptions are similar to Cisco debugs

-How to create traceoption files and flags and view the output of traceoption files

 

More info:

_http://www.bowlercbtlabs.com/products/juniper-lab-cbt-video-series-1

 

 

[letitbit.net]

Hidden Content

    Give reaction to this post to see the hidden content.

 

[downloadline.net]

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Edited by sfarmy
Please hide your links
  • Like 4

Share this post


Link to post
Share on other sites

Links not working.

confirmed, no available links

Share this post


Link to post
Share on other sites

I am not sure how to download them, it is asking to register and use my credit card. Please advise if those links are still valid.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...