Jump to content
Sign in to follow this  
markjw

Can someone test HSRP in Packet Tracer 6.0 for me

Recommended Posts

Mods: please move this if it is in the wrong place

 

I have tried the following senario in Packet Tracer 6.0 build 45 and 6.0.1 build 11 and have had the same problem - the setup is as follows:

 

Switch 1 - Cisco 3560-24

 

VLAN 10 created and an interface created - int vlan 10 ip address 192.168.1.4 255.255.255.0

fa0/0 - dot1q VLAN trunk with VLAN10 allowed

fa0/1 - dot1q VLAN trunk with VLAN10 allowed

 

Router 1 - Cisco 2811

 

interface fa0/0 connected to Switch 1 fa0/0

sub interface fa0/0.10 created on VLAN10 - IP address 192.168.1.1 255.255.255.0

HSRP setup on fa0/0.10 - standby IP address 192.168.1.3, priority 50

 

Router 2 - Cisco 2811

 

interface fa0/0 connected to Switch 1 fa0/1

sub interface fa0/0.10 created on VLAN10 - IP address 192.168.1.2 255.255.255.0

HSRP setup on fa0/0.10 - standby IP address 192.168.1.3, priority 100

 

Initally all looks good - I see HSRP go from Speak to Active and I can ping the 192.168.1.3 address from the router that has HSRP Active. However if I try and ping 192.168.1.3 from either Switch 1 or the HSRP Standby I get no response (ping to 192.168.1.1 and 192.168.1.2 work OK)- also if I setup the other interface on the 2811 routers and another switch, I cannot route traffic via 192.168.1.3

 

Any help appreciated as the same setup works on real hardware with no problem - so am I doing something wrong with Packet Tracer or is there a bug?

 

Thanks,

Mark

Share this post


Link to post
Share on other sites

it might be a bug.

 

when i did it in packet tracer in my NNP class we used L3 switches instead of 2811's you might want to try that. i want to say we used 3750's in the packet tracer lab.

 

 

you also might want to try shutting down both interfaces and bringing them back up one by one. i know some stuff in Packet tracer tends to like that a lot, like etherchannel.

  • Like 1

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...