Jump to content
zuzkie

Olive 10.1R1.8 Clean Install On Qemu 2.4Gb

Recommended Posts

Hi,

 

 

root> show version

Model: olive

JUNOS Base OS boot [10.1R1.8]

JUNOS Base OS Software Suite [10.1R1.8]

JUNOS Kernel Software Suite [10.1R1.8]

JUNOS Crypto Software Suite [10.1R1.8]

JUNOS Packet Forwarding Engine Support (M/T Common) [10.1R1.8]

JUNOS Packet Forwarding Engine Support (M20/M40) [10.1R1.8]

JUNOS Online Documentation [10.1R1.8]

JUNOS Voice Services Container package [10.1R1.8]

JUNOS Border Gateway Function package [10.1R1.8]

JUNOS Services AACL Container package [10.1R1.8]

JUNOS Services LL-PDF Container package [10.1R1.8]

JUNOS Services Stateful Firewall [10.1R1.8]

JUNOS AppId Services [10.1R1.8]

JUNOS IDP Services [10.1R1.8]

JUNOS Routing Software Suite [10.1R1.8]

 

root>

 

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

 

login: root

 

password is not set

 

Enjoy,

 

CLOSED AS LINKS ARE DEAD

 

Thanks and regards

Edited by ExamFerret
Dead Links

Share this post


Link to post
Share on other sites

Hi,

 

 

root> show version

Model: olive

JUNOS Base OS boot [10.1R1.8]

JUNOS Base OS Software Suite [10.1R1.8]

JUNOS Kernel Software Suite [10.1R1.8]

JUNOS Crypto Software Suite [10.1R1.8]

JUNOS Packet Forwarding Engine Support (M/T Common) [10.1R1.8]

JUNOS Packet Forwarding Engine Support (M20/M40) [10.1R1.8]

JUNOS Online Documentation [10.1R1.8]

JUNOS Voice Services Container package [10.1R1.8]

JUNOS Border Gateway Function package [10.1R1.8]

JUNOS Services AACL Container package [10.1R1.8]

JUNOS Services LL-PDF Container package [10.1R1.8]

JUNOS Services Stateful Firewall [10.1R1.8]

JUNOS AppId Services [10.1R1.8]

JUNOS IDP Services [10.1R1.8]

JUNOS Routing Software Suite [10.1R1.8]

 

root>

 

http://rapidshare.com/files/375877699/olive-base-101R1.8.part01.rar

http://rapidshare.com/files/375912937/olive-base-101R1.8.part02.rar

http://rapidshare.com/files/375926907/olive-base-101R1.8.part03.rar

http://rapidshare.com/files/376191421/olive-base-101R1.8.part04.rar

http://rapidshare.com/files/376229966/olive-base-101R1.8.part05.rar

http://rapidshare.com/files/376245892/olive-base-101R1.8.part06.rar

http://rapidshare.com/files/376263395/olive-base-101R1.8.part07.rar

http://rapidshare.com/files/376278157/olive-base-101R1.8.part08.rar

http://rapidshare.com/files/376315298/olive-base-101R1.8.part09.rar

http://rapidshare.com/files/376332664/olive-base-101R1.8.part10.rar

http://rapidshare.com/files/376823668/olive-base-101R1.8.part11.rar

http://rapidshare.com/files/376834365/olive-base-101R1.8.part12.rar

http://rapidshare.com/files/376903222/olive-base-101R1.8.part13.rar

http://rapidshare.com/files/376917615/olive-base-101R1.8.part14.rar

http://rapidshare.com/files/376939334/olive-base-101R1.8.part15.rar

http://rapidshare.com/files/376959912/olive-base-101R1.8.part16.rar

http://rapidshare.com/files/376991462/olive-base-101R1.8.part17.rar

http://rapidshare.com/files/377007517/olive-base-101R1.8.part18.rar

http://rapidshare.com/files/377021650/olive-base-101R1.8.part19.rar

http://rapidshare.com/files/377051854/olive-base-101R1.8.part20.rar

http://rapidshare.com/files/377059558/olive-base-101R1.8.part21.rar

 

login: root

 

password is not set

 

Enjoy,

 

 

hai zuzkie thanks for the share

 

can u make a torrent of this so that it would be easier to download

 

 

thanks in advance

Share this post


Link to post
Share on other sites

when i start this junos image within GNS3 i get plenty of ERROR MSG :

THE FOLLOWING DISK SECTORS COULD NOT BE READ: 13922656, 13922657, 13922658, 13922659, 13922660, 13922661, 13922662, 13922663, 13922664, 13922665, 13922666, 13922667, 13922668, 13922669, 13922670, 13922671, 13922672, 13922673, 13922674, 13922675, 13922676, 13922677, 13922678, 13922679, 13922680, 13922681, 13922682, 13922683, 13922684, 13922685, 13922686, 13922687, 13922688, 13922689, 13922690, 13922691, 13922692, 13922693, 13922694, 13922695, 13922696, 13922697, 13922698, 13922699, 13922700, 13922701, 13922702, 13922703, 13922704, 13922705, 13922706, 13922707, 13922708, 13922709, 13922710, 13922711, 13922712, 13922713, 13922714, 13922715, 13922716, 13922717, 13922718, 13922719, 13922720, 13922721, 13922722, 13922723, 13922724, 13922725, 13922726, 13922727, 13922728, 13922729, 13922730, 13922731, 13922732, 13922733, 13922734, 13922735, 13922736, 13922737, 13922738, 13922739, 13922740, 13922741, 13922742, 13922743, 13922744, 13922745, 13922746, 13922747, 13922748, 13922749, 13922750, 13922751, 13922752, 13922753, 13922754, 13922755, 13922756, 13922757, 13922758, 13922759, 13922760, 13922761, 13922762, 13922763, 13922764, 13922765, 13922766, 13922767, 13922768, 13922769, 13922770, 13922771, 13922772, 13922773, 13922774, 13922775, 13922776, 13922777, 13922778, 13922779, 13922780, 13922781, 13922782, 13922783,

 

CANNOT READ BLK: 13922784

CONTINUE? yes

 

then

 

THE FOLLOWING SECTORS COULD NOT BE WRITTEN: 5984, 5985, 5986, 5987,

 

***** FILE SYSTEM MARKED DIRTY *****

 

***** FILE SYSTEM WAS MODIFIED *****

 

***** PLEASE RERUN FSCK *****

WARNING:

WARNING: /var mount failed, building emergency /var

WARNING:

Creating initial configuration...

 

is this image corrupt ?

or is it normal behavior ?

Share this post


Link to post
Share on other sites

when i start this junos image within GNS3 i get plenty of ERROR MSG :

 

 

then

 

 

 

is this image corrupt ?

or is it normal behavior ?

 

I don't think that image is corrupted. Do you use GNS3 to run Juniper? The last version (0.7) create FLASH with default size 3GB and base image is 16GB. I t should be a reason why you see error messages above. For Linux it 's workaround - just edit qemuwrapper.py and replace 3G with 8G in line self.flash_size = '3G'.

For Windows qemuwrapper is binary file so you can't modify its. I rememember that it was reported and i hope it will be corrected in next GNS3 version.

Share this post


Link to post
Share on other sites

Hi zuzkie.

 

 

Do you have link download for junos 10.1R1.8. I want to try install in VMWARE....do you already try play with MPLS (L3VPN) using Qemu?

Share this post


Link to post
Share on other sites

GNS3 0.7.1 has been released and it seems that bug with creating default 3GB FLASH is fixed. You shouldn't see "THE FOLLOWING DISK SECTORS COULD NOT BE READ:" anymore.

Share this post


Link to post
Share on other sites

GNS3 0.7.1 has been released and it seems that bug with creating default 3GB FLASH is fixed. You shouldn't see "THE FOLLOWING DISK SECTORS COULD NOT BE READ:" anymore.

Thanks for your infor. This is really a good news :1sweetkiss

Share this post


Link to post
Share on other sites

I installed the new version of GNS3 and I downloaded the olive image . everything works perfect but the problem I wanted to connect the JUNOS router in GNS3 to the cloud to be able to have an interface to the real network. however, it didnt work and only one JUNOS work at the time ....the other one I can't login into it

 

 

Thanks for the post and keep the good work

Share this post


Link to post
Share on other sites

I installed the new version of GNS3 and I downloaded the olive image . everything works perfect but the problem I wanted to connect the JUNOS router in GNS3 to the cloud to be able to have an interface to the real network. however, it didnt work and only one JUNOS work at the time ....the other one I can't login into it

 

 

Thanks for the post and keep the good work

 

 

Hi,

if you run GNS3 on Windows it is a bug in Qemu that hasn't been solved even in newest 0.7.1 version. It allow you run only one Juniper at the time.

Qemu on Linux works OK.

 

Hidden Content

    Give reaction to this post to see the hidden content.

 

I prefer Linux to Windows. Yo can connect Juniper (or Cisco) via tap interface - just bridge tap with eth. Here is a tutorial:

 

Hidden Content

    Give reaction to this post to see the hidden content.

 

The second option is connecting Juniper directly to Eth card (no tap interface creating is needed). I prefer this one because it is much more easier to setup. It is necessary to use generic switch for connection cloud to interface of Juniper. Please, see the snapshot.

 

Thanks,

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Share this post


Link to post
Share on other sites

thank u so much zuzkie.i run olive image on windows xp and its work fine.

i am new in juniper .if u can provide some guidelines for running two routers then i m thankful to u.

Share this post


Link to post
Share on other sites

Dears i have a problem when trying to console on the junos router , it does't give me any result so please advice what i am doing wrong

All i did , i downloaded the image above , i opened the gns3 , junos image , i assigned the image under the binary image , i tried to start the router and console on it but no result.

Share this post


Link to post
Share on other sites

Hi,

I have the same problem as heartattack888. i have downloaded the olive image and tested this using GNS3 on windows 7 and this works fine, i.e. i can start one instance of juniper router using the olive image. In windows 7 in GNS3 when i right click on the JUNOS1 router and select start, i get a qemu window that shows me the booting status of the router and it tells me the router is booted and provides a command prompt to login.

Since there limitation of one olive router under windows due to qemu bug, i switched to linux, i.e. Kubuntu 10.04. I downloaded same version of GNS3 for linux and did untar and ran GNS3 under kubuntu.

I followed the same procedure to configure GNS3 and selected the same olive-img and than right clicked on JUNOS1 router in GNS3 and selected start. Under linux i do not get any qemu window and i get no status of if router is booting or not. In GNS3 console window when i run =>list, it tells me router is running. Question how to i get a qemu console window that shows me the status of router booting in kubuntu. I did change the terminal settings to use kde console in GNS3.

Can someone please help......

 

Please how do i run olive in GNS3 in linux......Please help....Can someone provide step by step instructions....

 

Thanks

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

×
×
  • Create New...