Jump to content
funabashi

vMX beta

Recommended Posts

Hi all,

 

 

Is it anyone facing same problem same with me. Below is my setu using logical system with RE + MPC.

 

1.) R1 = ge-2/0/0 = ip address 4.4.4.1/24

2.) R2 = ge-2/0/7 = ip address 4.4.4.4/24

 

From R1 cannot ping R2 when R2 using interface above ge-2/0/6. Is it need to add something to make sure we can use all the interface in that MPC at same time? Thanks and appreciate someone help

Share this post


Link to post
Share on other sites

Hi all,

 

 

Is it anyone facing same problem same with me. Below is my setu using logical system with RE + MPC.

 

1.) R1 = ge-2/0/0 = ip address 4.4.4.1/24

2.) R2 = ge-2/0/7 = ip address 4.4.4.4/24

 

From R1 cannot ping R2 when R2 using interface above ge-2/0/6. Is it need to add something to make sure we can use all the interface in that MPC at same time? Thanks and appreciate someone help

The mapping only supports interfaces ge-2/0/0 through ge-2/0/6, 7 total. Not sure howto increase or change this. The VM was originally constructed on the linux KVM Platform which allows for more interfaces

 

Share this post


Link to post
Share on other sites

 

The mapping only supports interfaces ge-2/0/0 through ge-2/0/6, 7 total. Not sure howto increase or change this. The VM was originally constructed on the linux KVM Platform which allows for more interfaces than VMWare

Share this post


Link to post
Share on other sites

Hi Madrouter,

 

 

So in other word that was no point the latest vMX have 20 interfaces but just can use only 7 interface if they run under VM Workstation.

Share this post


Link to post
Share on other sites

is it possible to have two REs in vMX to test some of the redundancy options in juniper ? if yes pls let me know how to configure to have two REs with one MPC.

Share this post


Link to post
Share on other sites

Just read several last pages in this thread

 

i searched all posts and find only one link from

Hidden Content

    Give reaction to this post to see the hidden content.
which we can't download any thing from it. hope if any one share in another website.

 

Thanks

Share this post


Link to post
Share on other sites

here are the mega links

 

vMX-RE

Hidden Content

    Give reaction to this post to see the hidden content.

vMX-MPC2

Hidden Content

    Give reaction to this post to see the hidden content.

Edited by gangadar1234
  • Like 1

Share this post


Link to post
Share on other sites

here are the mega links

 

vMX-RE

Hidden Content

    Give reaction to this post to see the hidden content.

vMX-MPC2

Hidden Content

    Give reaction to this post to see the hidden content.

 

Big Thanks gangadar.

Share this post


Link to post
Share on other sites

Wanted to thank everyone here for all the good input.. I tested mine on VMware Workstation.. and that works just fine..

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Hidden Content

    Give reaction to this post to see the hidden content.

Share this post


Link to post
Share on other sites

On a another note.. Did you guys test the minimum ram/cpu for RE and MPC VM's.. I will be testing mine and report back in a few days..

Share this post


Link to post
Share on other sites

has anyone got l2VPN working on vMX?

 

[email protected]> show configuration routing-instances

VPNC {

instance-type l2vpn;

interface ge-0/0/1.0;

route-distinguisher 3333:300;

vrf-target target:3333:300;

protocols {

l2vpn {

encapsulation-type ethernet;

interface ge-0/0/1.0;

site PE1 {

site-identifier 1;

}

}

}

}

 

 

 

[email protected]> show l2vpn connections

Layer-2 VPN connections:

 

Legend for connection status (St)

EI -- encapsulation invalid NC -- interface encapsulation not CCC/TCC/VPLS

EM -- encapsulation mismatch WE -- interface and instance encaps not same

VC-Dn -- Virtual circuit down NP -- interface hardware not present

CM -- control-word mismatch -> -- only outbound connection is up

CN -- circuit not provisioned <- -- only inbound connection is up

OR -- out of range Up -- operational

OL -- no outgoing label Dn -- down

LD -- local site signaled down CF -- call admission control failure

RD -- remote site signaled down SC -- local and remote site ID collision

LN -- local site not designated LM -- local site ID not minimum designated

RN -- remote site not designated RM -- remote site ID not minimum designated

XX -- unknown connection status IL -- no incoming label

MM -- MTU mismatch MI -- Mesh-Group ID not available

BK -- Backup connection ST -- Standby connection

PF -- Profile parse failure PB -- Profile busy

RS -- remote site standby SN -- Static Neighbor

LB -- Local site not best-site RB -- Remote site not best-site

VM -- VLAN ID mismatch

 

Legend for interface status

Up -- operational

Dn -- down

 

Instance: VPNC

Local site: PE1 (1)

No connections found.

 

 

[email protected]> show configuration interfaces ge-0/0/1

encapsulation ethernet-ccc;

unit 0;

Share this post


Link to post
Share on other sites

Hi All,

 

 

During testing the vMX i found that we cannot set MTU on logical unit. Example ge-0/0/1.123 mtu 1400 ....Command MTU do not exists under logical unit. My VMX undert ESXi.

 

Can someone verify it whether your vMX supported or not?

 

Thanks

Share this post


Link to post
Share on other sites

Hi All,

 

 

During testing the vMX i found that we cannot set MTU on logical unit. Example ge-0/0/1.123 mtu 1400 ....Command MTU do not exists under logical unit. My VMX undert ESXi.

 

Can someone verify it whether your vMX supported or not?

 

Thanks

 

it's supported under unit 0 only if i re-call correctly, also vMX only supports 2000 bytes as a max for jumbo frames, obviously in your case your using 1400 bytes which should be ok

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...