root0 38,478 Posted February 1, 2018 New SW - magnet link updated FirePOWER_Management_Center Change Log added latest version Rules and Patch: TSAgent-1.2.0.exe Sourcefire_3D_Defense_Center_S3_Patch-6.1.0.6-85.sh Sourcefire_Geodb_Update-2018-01-29-002.sh Sourcefire_Rule_Update-2018-01-29-001-vrt.sh Sourcefire_VDB_Fingerprint_Database-4.5.0-292.sh Hidden Content Give reaction to this post to see the hidden content. 6 Quote Share this post Link to post Share on other sites
mindragon2013 39 Posted February 11, 2018 (edited) The instructions for the crack on page 10 have been updated: - Updated evaluation period to ~88 years. - Simplified instructions. - Added support for high availability devices. - Fixed a problem when inserting rows in to the license_caps table, the value for last_changed column was accidentally omitted in the previous instructions. To fix this problem, in the MySQL console run "delete from license_caps where last_changed = 1; " and then perform the updated instructions above. - Discovered that export controlled features not only effect Remote Access VPNs but also the SSL settings in a Platform Settings policy. It appears that with 6.2.2.1 the Evaluation mode no longer supports 3des for VPN. Any ideas? I did enable "Export-Controlled Features" and it shows enabled on the dashboard. Edit: Looks like it is no longer enough to restart the process -- a reboot fixed it. Edited February 11, 2018 by mindragon2013 Quote Share this post Link to post Share on other sites
jchan 8 Posted February 13, 2018 (edited) I am running 6.2.1, I couldn't find the /etc/sf/.health_monitor.data I tired ls -al command but no luck. I tired the following command but it just opened a blank new file. [email protected]:~# vi /etc/sf/.health_monitor.data Any help would be appreciated. Thanks Edited February 13, 2018 by jchan Quote Share this post Link to post Share on other sites
jchan 8 Posted February 14, 2018 Hi, After intalling FPMC 6.2.1 I do not see file .health_monitor.data in /etc/sf Please answer what is possible reason? Best regards I have the same issue, how did you resolve it? please share. Quote Share this post Link to post Share on other sites
ppsilvsa 21 Posted February 28, 2018 I am running 6.2.1, I couldn't find the /etc/sf/.health_monitor.data I tired ls -al command but no luck. I tired the following command but it just opened a blank new file. [email protected]:~# vi /etc/sf/.health_monitor.data Any help would be appreciated. Thanks I have the same issue, how did you resolve it? please share. I believe that you need to register the FTD with the Management Center before you can see the file .health_monitor.data in /etc/sf At least that was what happened in my case. Quote Share this post Link to post Share on other sites
ppsilvsa 21 Posted February 28, 2018 (edited) First I would like to say thanks to muhfugen for his work and effort, and also to root0 for having shared all this files. Does anyone knows if there is a procedure to do get "Unlimeted evaluation" in an FTD using Firepower Device Manager ? (FTDv VMWare version, 6.2.2) I log into the FTD via SSH, get into expert mode, then enter the /etc/sf and, as it is not registered the same way as an FTD resgisters to an FMC, the .health_monitor.data file is not present. Any ideas ? Edited February 28, 2018 by ppsilvsa Quote Share this post Link to post Share on other sites
freemotion 88 Posted March 1, 2018 New SW - magnet link updated FirePOWER_Management_Center Change Log added latest version Rules and Patch: TSAgent-1.2.0.exe Sourcefire_3D_Defense_Center_S3_Patch-6.1.0.6-85.sh Sourcefire_Geodb_Update-2018-01-29-002.sh Sourcefire_Rule_Update-2018-01-29-001-vrt.sh Sourcefire_VDB_Fingerprint_Database-4.5.0-292.sh Thanks to you, I cracked FMC based on your post and am using it as full-function and unlimited demo. Would I ask updating just Snort rules on FMC break this crack? You have mentioned that updating FMC breaks the crack and all of the procedures should be done from the beginning. But what about just Snort rules? Quote Share this post Link to post Share on other sites
root0 38,478 Posted March 10, 2018 New SW - magnet link updated FirePOWER_Management_Center Change Log added latest version Rules and Patch: Sourcefire_3D_Defense_Center_S3_Patch-6.2.2.2-109.sh.REL.tar Sourcefire_Geodb_Update-2018-03-05-002.sh Sourcefire_Rule_Update-2018-03-07-001-vrt.sh Sourcefire_VDB_Fingerprint_Database-4.5.0-294.sh Hidden Content Give reaction to this post to see the hidden content. 3 1 Quote Share this post Link to post Share on other sites
Exillmat 1 Posted April 17, 2018 (edited) New SW - magnet link updated FirePOWER_Management_Center Change Log added latest version Rules and Patch: Sourcefire_3D_Defense_Center_S3_Patch-6.2.2.2-109.sh.REL.tar Sourcefire_Geodb_Update-2018-03-05-002.sh Sourcefire_Rule_Update-2018-03-07-001-vrt.sh Sourcefire_VDB_Fingerprint_Database-4.5.0-294.sh A thousand thanks for all your work root0 !! I was afraid that the site would be gone forever when it went down for so long. I have tried to download your updated links for, "FirePOWER Management Center Collection", "FirePOWER NGFWv Collection" and "FirePOWER Services for ASA", but they aren't downloading. I can add the magnet links to my seedbox, but nothing happens. Nothing is being downloaded. Can you confirm that they are working? I have tried to add some of your earlier magnet links and they work fine. Thanks for all the work you put into these links. Hidden Content Give reaction to this post to see the hidden content. /uploads/emoticons/default_cool.png"> Edited April 17, 2018 by Exillmat 1 Quote Share this post Link to post Share on other sites
root0 38,478 Posted April 19, 2018 The current collection you can find via search engine - Hidden Content Give reaction to this post to see the hidden content. 4 Quote Share this post Link to post Share on other sites
freemotion 88 Posted April 19, 2018 The current collection you can find via search engine - Hidden Content Give reaction to this post to see the hidden content. Hi. the Magnet link is empty or shows nothing. I tried on many locations with different internet connection to be sure it is not blocked by any firewall. do links work? 1 Quote Share this post Link to post Share on other sites
root0 38,478 Posted April 19, 2018 Hidden Content Give reaction to this post to see the hidden content. 2 Quote Share this post Link to post Share on other sites
root0 38,478 Posted April 23, 2018 New SW - magnet link updated FirePOWER_Management_Center Change Log added latest version Rules and Patch: Sourcefire_Geodb_Update-2018-04-17-002.sh Sourcefire_Rule_Update-2018-04-18-001-vrt.sh Sourcefire_3D_Defense_Center_S3_Upgrade-6.2.3-84.sh Sourcefire_3D_Defense_Center_S3_Upgrade-6.2.3-84.sh.REL.tar Hidden Content Give reaction to this post to see the hidden content. 4 Quote Share this post Link to post Share on other sites
GPrime985 22 Posted April 25, 2018 @root0 Any luck on the 3D Device restore ISO's? Quote Share this post Link to post Share on other sites