Kreator777 260 Posted September 6 On 9/5/2020 at 12:36 PM, MrSquirrel said: Unfortunatley v10 will not be available for the PA-3000 series. It is only supported up to v9.x.x Ah, sad to know.. I have 3060 with 10Gbit ports and assume they will work on and on all right, will stick to 9.x also if you'd have a chance to share 9.1.4 would be much appreciated thank you 1 Quote Share this post Link to post Share on other sites
zhopol 0 Posted September 12 Hey all. Any method to force contents package into palo with expired threat license? Thanks Quote Share this post Link to post Share on other sites
beatgara007 1 Posted September 13 Please Palo Alto Image lastest version for gns3 1 Quote Share this post Link to post Share on other sites
soywiki 1 Posted September 16 Anybody with lastest published firmware for PA-3050 (9.1.X)? Thank you very much! 1 Quote Share this post Link to post Share on other sites
casper87 2 Posted September 21 Can anybody share Panos v10 ova file on mega. The torrent is not seeded. 1 Quote Share this post Link to post Share on other sites
Recycling 567 Posted September 22 @casper87 - see on my post on page 18 - there are many PanOS and also Panorama and PanOS-VM ova files.... Quote Share this post Link to post Share on other sites
jeditec 4 Posted September 27 On 5/13/2020 at 10:37 AM, Recycling said: Hi, here is the latest PanOS for PA-200 & PA-500 & PA-220 & PA-800 & Panorama-9.1.2 & PA-VM-ESX-9.1.2 PanOS-200_8.0.20 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS-200_8.1.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_200-8.1.15-h5 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-6.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-6.1.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-7.0.1 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-7.1.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-8.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-8.1.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-8.1.13 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-8.1.14 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_500-8.1.15 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_220-9.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_220-9.0.9 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_220-9.1.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_220-9.1.3 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_220-10.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_8x0-9.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_8x0-9.0.8 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_8x0-9.0.9 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_8x0-9.1.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_8x0-9.1.3 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PanOS_8x0-10.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. Panorama-ESX-9.1.2 Hidden Content Hidden Content Give reaction to this post to see the hidden content. Panorama-ESX-10.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PA-VM-ESX-9.1.2 Hidden Content Hidden Content Give reaction to this post to see the hidden content. PA-VM-ESX-10.0.0 Hidden Content Hidden Content Give reaction to this post to see the hidden content. I went up to 8.1.15 on my PA500, but after every update, it was getting slower, I found the best was 6.1.0, as it got rid of the flash requirement and it was still usable., 8.1.15 even had an issue when browsing top applications, the filters were not getting applied in the detail view, so I went back and back till 6.1.0, it was journey of one entire day. Also I found that the newer applications definitions don't work with 6.1.0 it broke the system and was not putting the interfaces up, maybe they will work with 6.1.21 Can you please provide the PanOS_500-6.1.21? 4 Quote Share this post Link to post Share on other sites
Recycling 567 Posted September 29 On 9/27/2020 at 7:03 PM, jeditec said: I went up to 8.1.15 on my PA500, but after every update, it was getting slower, I found the best was 6.1.0, as it got rid of the flash requirement and it was still usable., 8.1.15 even had an issue when browsing top applications, the filters were not getting applied in the detail view, so I went back and back till 6.1.0, it was journey of one entire day. Also I found that the newer applications definitions don't work with 6.1.0 it broke the system and was not putting the interfaces up, maybe they will work with 6.1.21 Can you please provide the PanOS_500-6.1.21? Sorry, but i don*t have this version. Quote Share this post Link to post Share on other sites
jeditec 4 Posted September 29 (edited) 39 minutes ago, Recycling said: Sorry, but i don*t have this version. Thank you for the reply, don't worry, I will check if I can find proper ram for the PA500 to make it 2GB I think that will help to handle the newer versions, also planning on cloning the HDD to an SSD as IO wait times are really high. Edited September 29 by jeditec Correction Quote Share this post Link to post Share on other sites
Xaztin 115 Posted October 5 On 2/5/2019 at 6:32 PM, muhfugen said: Hey guys, I got bored and developed a crack for Palo Alto Networks virtual firewall. Just like my crack for Cisco Firepower Threat Defense, you do it all yourself so there is no question about wether or not malware has been installed. This assumes you have enough experience with the Linux command line to be able to edit text files, and understand the basics of using a hex editor. And although these instructions are for vSphere they should be easily adaptable for other hypervisors. I dont have a physical device to play with so i'm not sure if you can crack hardware appliances with these instructions. Hidden Content - Deploy the .ova file to your vSphere host, but do not power it on. - Use a scp program (such as WinSCP) to copy the .vmdk file to your computer. - Open the .vmdk file in a hex editor (such as HxD). - Enable the GRUB boot loader menu and remove the password from it. To do so replace hiddenmenu at offsets 0xB961019, 0xB962019, 0xB96301A, 0xB964019, 0x7A8EA014 with new line characters (0x0A) or other suitable whitespace. And replace password --md5 $1$yMKkNlnT$BDBNplJZAqlKyk.CUV4Vd0 at offsets 0xB961024, 0xB962024, 0xB963025, 0xB964024 with new line characters (0x0A) or other suitable whitespace. Please note that not all GRUB configuration files will have passwords, and technically they don't all need to be edited, but i'm not motivated enough to figure out which one in particular so we'll just edit them all. These offsets are for version 8.1, if a new version comes out, just search for hiddenmenu and you should be able to find the GRUB configuration files easily enough. - Replace the .vmdk file on your vSphere host with the modified copy you just created, with a scp program (such as WinSCP). - Power on the VM and let it boot PanOS for the first time to allow license initialization to occur. - Log in to the device in the WebUI, and shut it down from Device->Operations->Device Operations->Shutdown Device. - Edit the VM and give it an Hidden Content Give reaction to this post to see the hidden content. for the license type you want installed. If I remember correctly, failure to boot the system will the required minimum resources will remove all licenses from the system. - Power on the VM and hit the Escape key at the boot loader when it says Hit any key to stop autoboot... - Select the line which says PANOS (sysroot0) and press the E key to edit it. - Select the line which starts with kernel /boot/vmlinuz and press the E key to edit it. - Append single to the end of this boot loader entry to enable single user mode, and press the Return key to temporarily save it. - Press the B key to boot in to single user mode. - Edit /etc/cfgdb/eeprom.xml and change the value of platform.lic-cap to the type of license you want, such as VM-700 - Edit /etc/cfgdb/mp/vm/defaults.cfgdb.xml and change the value of general.vm-license from 'none' to the type of license you want enclosed in single quotes such as 'VM-700' - Delete /etc/cfgdb/dp/vm/cfgdb.xml and cfgdb.xml.old - Copy the appropriate .xml and .xml.old license files from /etc/cfgdb_license, such as cfgdb.vm700.xml and cfgdb.vm700.xml.old, to /etc/cfgdb/dp/vm, and rename them to cfgdb.xml and cfgdb.xml.old - Reboot the server with shutdown -r now Hidden Content Give reaction to this post to see the hidden content. Hi, Did anyone tried this crack? I have been trying to edit the mentioned offsets for days now but couldn't able to crack. If someone cracked this please let me know and guide me to crack the same. thanks in advance. 37 16 1 2 Quote Share this post Link to post Share on other sites
masterjack 943 Posted October 5 On 3/9/2018 at 6:30 PM, ExamFerret said: (No licences, sorry) PA-VM-KVM-8.0.5.qcow2 Hidden Content Hidden Content Give reaction to this post to see the hidden content. Can please share version 9.1 ? Panorama-ESX-9.1.0.ova On 3/9/2018 at 6:30 PM, ExamFerret said: PA-VM-ESX-8.1.0.ova Hidden Content Hidden Content Give reaction to this post to see the hidden content. Panorama-ESX-8.1.0.ova Hidden Content Hidden Content Give reaction to this post to see the hidden content. Quote Share this post Link to post Share on other sites
mykalachi1 61 Posted October 5 Hi Guys, Anyone came up with sure shot solution to crack the Palo Alto FW? Please elaborate on the use of HEX editor since I tried but the image get corrupted all the time. Quote Share this post Link to post Share on other sites
masterjack 943 Posted October 5 On 8/4/2020 at 7:53 PM, certway4life said: Hello team, I need to do HA with LACP on palo alto FW running on eve-ng. I could nit see the option to created aggregated ethernet on PA.9.1.2. Any suggestions on which version supports this? cheers Not supported on VM series Quote Share this post Link to post Share on other sites
knightwillhem 13 Posted October 6 18 hours ago, mykalachi1 said: Hi Guys, Anyone came up with sure shot solution to crack the Palo Alto FW? Please elaborate on the use of HEX editor since I tried but the image get corrupted all the time. I second this. I too am looking for a sure fire way to crack Palo Alto Firewall. I have tried the HEX editor and never ends well. Quote Share this post Link to post Share on other sites
