[Req] Cisco IOS : urgent

[elanouar 31]

Hello , 

For an urgent training I'm in need of the below IOS :

• Cisco 4221 with Cisco IOS XE Release 16.9.4 (universalk9 image) : router 
•  Cisco 3650,with Cisco IOS XE Release 16.9.4 (universalk9 image) : SW
• Cisco 2960+ with IOS release 15.2 : SW

Please note that I have searched and downloaded a lot of IOSs from the current forum, but all of them are not valid IOS.

Thank you in advance for your time and your answer.

Edited May 3 by elanouar

[yoshi7 2,814]

Hidden Content

Give reaction to this post to see the hidden content.

[elanouar 31]

10 hours ago, yoshi7 said:

Hidden Content

 

isr4200-universalk9_ias.16.09.04.SPA.bin

cat3k_caa-universalk9.16.09.04.SPA.bin

c2960-lanbasek9-mz.152-7.E1.bin

 

There is a bundle of 3 images in zip-archive:

Hidden Content

Give reaction to this post to see the hidden content.

 

 

Hello yoshi7,

Thank you for your support but as shown in the joined file the IOSs are not valid. Please can you confirm that this IOSs were tested from your side and are valid or not. 
Thank you in advance for your time and your response.

Ps :  the verson of GNS3 is V 2.2.7

Hidden Content

Give reaction to this post to see the hidden content.

Edited May 3 by elanouar

[yoshi7 2,814]

>as shown in the joined file the IOSs are not valid.

This is real ios and ios-xe images for real hardware, exactly what you are requested. You didn't mention that you going to use it in GNS3.

>Please can you confirm that this IOSs were tested from your side and are valid or not.

No, I only downloaded each of them, and 99,9% that each will be working fine in real hw devices.

>Ps :  the verson of GNS3 is V 2.2.7

Never used GNS3, sorry.  I don't know which images are valid for GNS3.

 

Why are you thinking that images you are requested are able to run in GNS3? I'm unaware of such capability of GNS3 to run real images.

If I'm wrong - you or somebody else should clarify this or read gns3 docs.