Jump to content
Mardouk

Cisco CCNP Enterprise 300-420 ENSLD dump + Cert Guide

Recommended Posts

hello,

i'm looking for the correct answer for these questions (+ an exaplantion) : 

Question 34
Which feature is required for graceful restart to recover from a processor failure?
 

  1. Cisco Express Forwarding
  2. Virtual Switch System
  3. Stateful Switchover
  4. Bidirectional Forwarding Detection

Answer:
1. Cisco Express Forwarding
or 
3. Stateful Switchover

 

Question 36
An infrastructure team is concerned about the shared memory utilization of a device, and for this reason, they need to monitor the device state. Which solution limits impact on the device and provides the required data?
 

  1. IPFIX
  2. static telemetry
  3. on-change subscription
  4. periodic subscription

Answer:
1. IPFIX
or
3. on-change subscription

 

Question 50
An engineer is working with NETCONF and Cisco NX-OS based devices. The engineer needs a YANG model that supports a specific feature relevant only to Cisco NX-OS. Which model must the engineer choose?
 

  1. Native
  2. IEEE
  3. OpenConfig
  4. IETF

Answer:
1. IETF
or 
3. OpenConfig

 

Thanks !

Regards,

Mardouk

  • Like 1

Share this post


Link to post
Share on other sites
On 12/4/2020 at 6:19 PM, Mardouk said:

Hello,

Here is the Cert Guide + a dump of 93 Questions + 5 DnD 

 

Hidden Content

  • Give reaction to this post to see the hidden content.

 

We've tried with several people from the forum to get correct answers on the Questions + the reference so if you want to help... 🙂

i've made a ne thread so it will be easier to use only the ge.tt link and to post the updated pdf in it.

Thanks,

Mardouk

Can you re-upload the file?

It is not more available

  • Like 1

Share this post


Link to post
Share on other sites
18 hours ago, smartlen said:

Can you re-upload the file?

It is not more available

Hello,

It should be available now, there is a daily download limit - Could you recheck ?

EDIT-1 : i've separated the cert guide from the dump so it will be harder to reach the daily limit on the ge.tt link 🙂

Thanks,

Mardouk

Edited by Mardouk

Share this post


Link to post
Share on other sites
On 12/5/2020 at 5:19 AM, Mardouk said:

Hello,

Here is the Cert Guide + a dump of 93 Questions + 5 DnD 

Hidden Content
  • Hidden Content

      Give reaction to this post to see the hidden content.
    - MCQ + DnD

 

Hidden Content
  • Hidden Content

      Give reaction to this post to see the hidden content.
    - cert guide

 

We've tried with several people from the forum to get correct answers on the Questions + the reference so if you want to help... 🙂

i've made a ne thread so it will be easier to use only the ge.tt link and to post the updated pdf in it.

Thanks,

Mardouk

@mardouk thanks for creating a new thread and sharing the stuff... is it possible that you can upload these files to mega? I believe quite many people are after these files and you reaching daily traffic limit on this site... 

 

Regarding the Question 34, answer is 3.Stateful Switchover

For rest of the questions, I will try to find the correct answers.

 

Cheers.

 

  • Like 1

Share this post


Link to post
Share on other sites
1 hour ago, Maverickkhan said:

@mardouk thanks for creating a new thread and sharing the stuff... is it possible that you can upload these files to mega? I believe quite many people are after these files and you reaching daily traffic limit on this site... 

 

Regarding the Question 34, answer is 3.Stateful Switchover

For rest of the questions, I will try to find the correct answers.

 

Cheers.

 

@mardouk mate I was able to download the files... Thanks 🙂

Share this post


Link to post
Share on other sites

@Maverickkhan ok for the Q 34 🙂

I've updated the MCQ files to v1.3 with the following changes : 

      - Correction of the answer : 30/34/44/46/65/90/91/93/

      - Adding References to the Questions : 25/30/34/37/38/65/67/68/69/70/79/87/92/

      - Adding a "Dispute" for the Question 36 and 50

i'm leaving the v1.2 if someone would like to check the answer between the two versions ( which could be nice 🙂 )

Regards,

Mardouk

  • Like 2

Share this post


Link to post
Share on other sites
15 hours ago, Mardouk said:

@Maverickkhan ok for the Q 34 🙂

I've updated the MCQ files to v1.3 with the following changes : 

      - Correction of the answer : 30/34/44/46/65/90/91/93/

      - Adding References to the Questions : 25/30/34/37/38/65/67/68/69/70/79/87/92/

      - Adding a "Dispute" for the Question 36 and 50

i'm leaving the v1.2 if someone would like to check the answer between the two versions ( which could be nice 🙂 )

Regards,

Mardouk

@Mardouk thanks mate for your efforts... I am booking my exam for this weekend and will prepare myself using 1.3... lets see how it goes 🙂 really appreciate your efforts.

Maverick

Share this post


Link to post
Share on other sites

@Maverickkhan, Thanks for the kind words man 🙂

I've done some new changes  by correcting questions 50 and 73 + adding more references - the new file is in v 1.4 on the ge.tt link (hoping everything is correct... :s )

good luck for the test and keep us updated 🙂

Thanks,

Mardouk

Share this post


Link to post
Share on other sites
4 hours ago, Mardouk said:

@Maverickkhan, Thanks for the kind words man 🙂

I've done some new changes  by correcting questions 50 and 73 + adding more references - the new file is in v 1.4 on the ge.tt link (hoping everything is correct... :s )

good luck for the test and keep us updated 🙂

Thanks,

Mardouk

@Mardouk .. Once again.. thanks alot for the great help and continuously updating the file... will surely update everyone after my exam tomorrow... 

Share this post


Link to post
Share on other sites
On 12/4/2020 at 1:19 PM, Mardouk said:

Hello,

Here is the Cert Guide + a dump of 93 Questions + 5 DnD 

Hidden Content
  • Hidden Content

      Give reaction to this post to see the hidden content.
    - MCQ + DnD

 

Hidden Content
  • Hidden Content

      Give reaction to this post to see the hidden content.
    - cert guide

 

We've tried with several people from the forum to get correct answers on the Questions + the reference so if you want to help... 🙂

i've made a ne thread so it will be easier to use only the ge.tt link and to post the updated pdf in it.

Thanks,

Mardouk

Hi @Mardouk - thanks for all the hard work with this!

Do you have all the "Cisco.Premium.300-420.by.VCEplus.78q.pdf" questions in your 1.4 PDF? I can send you that PDF if you don't have it yet.

 

Share this post


Link to post
Share on other sites
6 minutes ago, ccdp2 said:

Hi @Mardouk - thanks for all the hard work with this!

Do you have all the "Cisco.Premium.300-420.by.VCEplus.78q.pdf" questions in your 1.4 PDF? I can send you that PDF if you don't have it yet.

 

hey @ccdp2,

Honestly i can not be sure - can you post a link to the pdf so i an check and adapt my files ?

thanks !

Mardouk

Share this post


Link to post
Share on other sites
5 minutes ago, Mardouk said:

hey @ccdp2,

Honestly i can not be sure - can you post a link to the pdf so i an check and adapt my files ?

thanks !

Mardouk

Does this work?

 

Hidden Content

    Give reaction to this post to see the hidden content.

 

I think there is a lot of overlap with your PDF, and the attached definitely has some wrong answers, but there may be some questions that are not included in your PDF that could be added.

Edited by ccdp2
  • Like 25
  • Thanks 16
  • Haha 1

Share this post


Link to post
Share on other sites
17 minutes ago, ccdp2 said:

Does this work?

 

Hidden Content

    Give reaction to this post to see the hidden content.

 

I think there is a lot of overlap with your PDF, and the attached definitely has some wrong answers, but there may be some questions that are not included in your PDF that could be added.

i'm not able to download it :s

could you attach the pdf file to your post ?

thanks,

Mardouk

  • Like 15
  • Thanks 3

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...