Jump to content

cc1ecisco

Members
  • Content Count

    89
  • Joined

  • Last visited

Community Reputation

17 Good

About cc1ecisco

  • Rank
    Advanced Member

Recent Profile Visitors

43 profile views
  1. ASA2v is not accessible through ASDM, so prepare 3.1 completely on CLI
  2. i don't know any other vendor for racks
  3. i passed in first attempt - however, we are a group of 5 guys and all faced TS1 and some guys have attempted multiple times.
  4. radius server CCIE add ipv4 150.1.7.212 auth-port 1812 acct-port 1813 pac key cisco ! aaa group server radius ISE server name CCIE ! aaa authorization network default group ISE aaa authorization network ISE group ISE ! cts credentials id SW2_P password ccieccie ! cts authorization list ISE cts sxp default source-ip 10.100.8.1 cts sxp default password ccie cts sxp connection peer 10.100.8.22 source 10.100.8.1 password default mode local speaker cts sxp enable ! ip radius source interface vlan150 Note: switchname and password command should be same as in "Network Device --> Trustsec section" in ISE
  5. yes, Slowness - small monitors and overall environment.
  6. yes, Slowness - small monitors and overall environment.
  7. yes i did with ccierack.rentals, they are cheap but racks are not good (use only rack 1 and 2)- there are so much problems in rack that u finally end up mastering the lab while resolving theissues.
  8. Humans still have to go a long way for mature "ROBOTS" - Prototypes result are not encouraging
  9. Passed and "STILL" Practicing - a legend spotted :biggrin:
  10. Use the below config and if you face any issue then PM me: radius server CCIE add ipv4 150.1.7.212 auth-port 1812 acct-port 1813 pac key cisco ! aaa group server radius ISE server name CCIE ! aaa authorization network default group ISE aaa authorization network ISE group ISE ! cts credentials id SW2_P password ccieccie ! cts authorization list ISE cts sxp default source-ip 10.100.8.1 cts sxp default password ccie cts sxp connection peer 10.100.8.22 source 10.100.8.1 password default mode local speaker cts sxp enable ! ip radius source interface vlan150
  11. off course other configuration have to be there - this single command will not make 3.5 work
×
×
  • Create New...