Jump to content

secholic

Members
  • Content Count

    9
  • Joined

  • Last visited

Community Reputation

6 Neutral

About secholic

  • Rank
    Junior Member

Profile Information

  • Gender
    Not Telling

Recent Profile Visitors

37 profile views
  1. sorry to hear that.. may i know which part do you fail?
  2. 394q is valid guys.. just pass few days before.. gud luck
  3. first, you should add each IOS image, just read the instruction [Hidden Content]
  4. just updated to my first post.. gud luck
  5. This link from dave guy [Hidden Content]
  6. Hooray.. Finally, I success deploy IPS in UNL, after stack for couple of weeks.. Many thanks to UnHolyDarkness & paulno1 for the assistance.. I love u guys ...
  7. Hi paulno1, thanks for your replay, configuring DNS only remove the warning, problem still exist, error unable to continue (save) kindly see screen output below: sensor# conf t sensor(config)# service host sensor(config-hos)# network-settings sensor(config-hos-net)# host-ip 192.168.1.2/24,192.168.1.3 sensor(config-hos-net)# dns-primary enable sensor(config-hos-net-ena)# address 8.8.8.8 sensor(config-hos-net-ena)# exit sensor(config-hos-net)# exit sensor(config-hos)# exit Apply Changes?[yes]: yes Error: SIOCSIFADDR: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device SIOCGIFFLAGS: No such device Error: SIOCSIFADDR: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device SIOCGIFFLAGS: No such device The configuration changes failed validation, no changes were applied. Would you like to return to edit mode to correct the errors? [yes]: sensor(config-hos)# my step to deploy IPS in UNL : 1. download "IPSforty-two-forty.ova" 2. Open ova with VMplayer to extract into "IPSforty-two-forty-disk1.vmdk" and "IPSforty-two-forty-disk2.vmdk" 3. copy to folder "cips-4240" in UNL, then convert file vmdk into qcow2 format qemu-img convert -f vmdk -O qcow2 IPSforty-two-forty-disk1.vmdk hda.qcow2 qemu-img convert -f vmdk -O qcow2 IPSforty-two-forty-disk2.vmdk hdb.qcow2 4. fix permission /opt/unetlab/wrappers/unl_wrapper -a fixpermissions what step did I miss ? and one more, The Error only happen in UNL, it didnt show up when I emulating IPS using VMware Workstation
  8. Hi everyone, below my step to deploy IPS in UNL : Download "IPSforty-two-forty.ova" This link from daveguy: [Hidden Content] Open "IPSforty-two-forty.ova" with VMplayer to extract into "IPSforty-two-forty-disk1.vmdk" and "IPSforty-two-forty-disk2.vmdk" Run Unetlab Run "WinSCP" to login to Unetlab (username=root, passw=root), its alot easier than command line on linux download WinSCP : [Hidden Content] Via WinSCP, go to directory "/opt/unetlab/addons/qemu" Create new folder "cips-4240" Copy "IPSforty-two-forty-disk1.vmdk" and "IPSforty-two-forty-disk2.vmdk" from your computer into "/opt/unetlab/addons/qemu/cips-4240" on UnetLab Convert file vmdk into qcow2 format, you must login to Unetlab console login as: root [email protected]'s password: Welcome to Ubuntu 14.04.2 LTS (GNU/Linux 3.13.0-52-generic x86_64) [email protected]:~# cd /opt/unetlab/addons/qemu/cips-4240/ [email protected]:/opt/unetlab/addons/qemu/cips-4240# qemu-img convert -f vmdk -O qcow2 IPSforty-two-forty-disk1.vmdk hda.qcow2 [email protected]:/opt/unetlab/addons/qemu/cips-4240# qemu-img convert -f vmdk -O qcow2 IPSforty-two-forty-disk2.vmdk hdb.qcow2 Via WinSCP, delete 2 files vmdk fix permissions [email protected]:/opt/unetlab/addons/qemu/cips-4240# /opt/unetlab/wrappers/unl_wrapper -a fixpermissions Now try to create new Lab, add new nodes, and taraa, you should see "image:cips-4240" Open the lab and run the node, then console the IPS Now lets fix the interfaces problems Log in to the IPS using account 'service' and password 'ciscoips123' Type: vi /usr/cids/idsRoot/etc/interface.conf (you need to know how to use the text editor 'vi') Scroll down until you see the section [models/IPS-4240/interfaces] Edit the "pci-path" section for each interface to match the QEMU PCI bus address of each NIC. QEMU E1000 bus addresses are usually: 3.0 4.0 5.0 6.0 7.0 need to change the device ID as well for each one Change every instance of: device-id=0x100f to device-id=0x100e Save the file and reboot the IPS sensor. login using account "cisco" pass "cisco" or "ciscoips123" thats all thanx to daveguy, paulno1, Unholydarkness
  9. Hi routergodbaba, thanks for the information, better study lab first while waiting for valid dump
  10. Hi everyone, I have already running IPS-4240 7.0(8)on UNL, but some how when I config, error occured : sensor(config)# service host sensor(config-hos)# network-settings sensor(config-hos-net)# host-ip 192.168.1.2/24,192.168.1.3 sensor(config-hos-net)# exi sensor(config-hos)# exi Apply Changes?[yes]: yes Warning: DNS or HTTP proxy is required for global correlation inspection and reputation filtering, but no DNS or proxy servers are defined. [color=#0000ff]Error: SIOCSIFADDR: No such device SIOCSIFNETMASK: No such device SIOCSIFBRDADDR: No such device SIOCGIFFLAGS: No such device[/color] anyone have met same problem ? anyone have the solution? help will be much appreciated
  11. iam looking for VCE too, right now iam still using A+ VCE Demo installed on android, it can open latest VCE format
×
×
  • Create New...