Jump to content

sk25

Members
  • Content Count

    84
  • Joined

  • Last visited

Community Reputation

4 Neutral

1 Follower

About sk25

  • Rank
    Advanced Member

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. ccde1234 file is remove any one can share ?
  2. i will buy ccde dumps from spoto but there are many sites by name spoto which is the official
  3. can anyone share ccde written valid dumps
  4. @ LocknLoad can you share CCDE1234 and CCDE99 documents i am preparing to give CCDE Written probably in 2 weeks
  5. Hello Guys, need SP valid dumps,anyone have ? thanks,
  6. There are many site by name spoto in their web address, which one is the official site for spoto ( i mean genuine)
  7. R24 R24#sh run Building configuration... Current configuration : 4000 bytes ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R24 ! boot-start-marker boot-end-marker ! aqm-register-fnf ! enable secret 5 $1$uCwn$/V8yxjYUPMuC0IUF9T4C9/ ! no aaa new-model clock timezone EET 2 0 mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ! ! ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! redundancy ! ! ! ! ! ! ! crypto isakmp policy 10 encr 3des authentication pre-share group 2 crypto isakmp key HollyMaya address 0.0.0.0 ! ! crypto ipsec transform-set esp-aes esp-aes esp-sha-hmac mode tunnel ! ! ! crypto dynamic-map HollyMayaDM 10 set transform-set esp-aes match address L2LVPN ! ! crypto map HollyMayaMap 10 ipsec-isakmp dynamic HollyMayaDM ! ! ! ! ! interface Loopback0 ip address 10.2.24.24 255.255.255.255 ip ospf 1 area 0 ! interface Tunnel0 ip address 10.200.0.1 255.255.255.0 no ip redirects tunnel source Ethernet0/0 tunnel mode gre multipoint ! interface Ethernet0/0 ip address 201.99.24.2 255.255.255.252 ip nat outside ip virtual-reassembly in ! interface Ethernet0/1 ip address 10.2.124.1 255.255.255.252 ip nat inside ip virtual-reassembly in ip ospf 1 area 0 ! interface Ethernet0/2 ip address 10.2.224.1 255.255.255.252 ip nat inside ip virtual-reassembly in ip ospf 1 area 0 ! interface Ethernet0/3 no ip address shutdown ! interface Ethernet1/0 no ip address shutdown ! interface Ethernet1/1 no ip address shutdown ! interface Ethernet1/2 no ip address shutdown ! interface Ethernet1/3 no ip address shutdown ! interface Serial2/0 no ip address shutdown serial restart-delay 0 ! interface Serial2/1 no ip address shutdown serial restart-delay 0 ! interface Serial2/2 no ip address shutdown serial restart-delay 0 ! interface Serial2/3 no ip address shutdown serial restart-delay 0 ! interface Serial3/0 no ip address shutdown serial restart-delay 0 ! interface Serial3/1 no ip address shutdown serial restart-delay 0 ! interface Serial3/2 no ip address shutdown serial restart-delay 0 ! interface Serial3/3 no ip address shutdown serial restart-delay 0 ! router ospf 1 router-id 10.2.24.24 ! router bgp 65002 bgp router-id 10.2.24.24 bgp log-neighbor-changes neighbor 10.2.23.23 remote-as 65002 neighbor 10.2.23.23 update-source Loopback0 neighbor 10.2.23.23 next-hop-self neighbor 201.99.24.1 remote-as 29999 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip nat pool R24 123.45.67.36 123.45.67.46 netmask 255.255.255.240 ip nat inside source route-map NAT pool R24 overload ! ip access-list extended L2LVPN permit ip 10.0.0.0 0.255.255.255 10.7.0.0 0.0.0.255 ip access-list extended NAT deny ip 10.0.0.0 0.255.255.255 10.7.0.0 0.0.255.255 permit ip 10.0.0.0 0.255.255.255 any ! ! route-map NAT permit 10 match ip address NAT ! ! R70>en Password: R70#sh run Building configuration... Current configuration : 3026 bytes ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R70 ! boot-start-marker boot-end-marker ! aqm-register-fnf ! enable secret 5 $1$I.Of$BZyJOvg8PX5V9OSk5BHZ// ! no aaa new-model clock timezone EET 2 0 mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ip dhcp pool NAS host 192.168.0.100 255.255.255.0 client-identifier 01aa.bbcc.0360.00 default-router 192.168.0.1 ! ip dhcp pool R71 host 192.168.0.2 255.255.255.0 client-identifier 01aa.bbcc.0200.00 default-router 192.168.0.1 ! ! ! ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Ethernet0/0 ip address 201.99.70.2 255.255.255.252 ! interface Ethernet0/1 ip address 192.168.0.1 255.255.255.0 ip nat inside ip virtual-reassembly in ! interface Ethernet0/2 no ip address shutdown ! interface Ethernet0/3 no ip address shutdown ! interface Ethernet1/0 no ip address shutdown ! interface Ethernet1/1 no ip address shutdown ! interface Ethernet1/2 no ip address shutdown ! interface Ethernet1/3 no ip address shutdown ! interface Serial2/0 no ip address shutdown serial restart-delay 0 ! interface Serial2/1 no ip address shutdown serial restart-delay 0 ! interface Serial2/2 no ip address shutdown serial restart-delay 0 ! interface Serial2/3 no ip address shutdown serial restart-delay 0 ! interface Serial3/0 no ip address shutdown serial restart-delay 0 ! interface Serial3/1 no ip address shutdown serial restart-delay 0 ! interface Serial3/2 no ip address shutdown serial restart-delay 0 ! interface Serial3/3 no ip address shutdown serial restart-delay 0 ! interface Dialer1 no ip address ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ip nat inside source list 1 interface Dialer1 overload ! ! ! access-list 1 permit any ! control-plane R71>en Password: R71#sh run Building configuration... Current configuration : 2836 bytes ! version 15.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname R71 ! boot-start-marker boot-end-marker ! aqm-register-fnf ! enable secret 5 $1$echW$hu/KivO1pacPZ0o/7WZsm. ! no aaa new-model clock timezone EET 2 0 mmi polling-interval 60 no mmi auto-configure no mmi pvc mmi snmp-timeout 180 ! ! ! ! ! ! ! ! ip dhcp pool User7 host 10.7.100.100 255.0.0.0 client-identifier 01aa.bbcc.0390.00 default-router 10.7.100.1 ! ! ! ip cef no ipv6 cef ! multilink bundle-name authenticated ! ! ! ! ! ! ! ! ! redundancy ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! interface Loopback0 ip address 10.7.71.71 255.255.255.255 ! interface Ethernet0/0 mac-address aabb.cc03.6000 ip address dhcp client-id Ethernet0/0 ! interface Ethernet0/1 ip address 10.7.100.1 255.255.255.0 ! interface Ethernet0/2 no ip address shutdown ! interface Ethernet0/3 no ip address shutdown ! interface Ethernet1/0 no ip address shutdown ! interface Ethernet1/1 no ip address shutdown ! interface Ethernet1/2 no ip address shutdown ! interface Ethernet1/3 no ip address shutdown ! interface Serial2/0 no ip address shutdown serial restart-delay 0 ! interface Serial2/1 no ip address shutdown serial restart-delay 0 ! interface Serial2/2 no ip address shutdown serial restart-delay 0 ! interface Serial2/3 no ip address shutdown serial restart-delay 0 ! interface Serial3/0 no ip address shutdown serial restart-delay 0 ! interface Serial3/1 no ip address shutdown serial restart-delay 0 ! interface Serial3/2 no ip address shutdown serial restart-delay 0 ! interface Serial3/3 no ip address shutdown serial restart-delay 0 ! ip forward-protocol nd ! ! no ip http server no ip http secure-server ! ! ! ! control-plane ! !
  8. Dear all Below is the section 3.4 full config , but no result. Please can anybody look into the issue R24: crypto isakmp policy 10 encr 3des authentication pre-share group 2 crypto isakmp key HollyMaya address 0.0.0.0 ! ! crypto ipsec transform-set esp-aes esp-aes esp-sha-hmac mode tunnel ! ! ! crypto dynamic-map HollyMayaDM 10 set transform-set esp-aes match address L2LVPN ! ! crypto map HollyMayaMap 10 ipsec-isakmp dynamic HollyMayaDM ! interface Loopback0 ip address 10.2.24.24 255.255.255.255 ip ospf 1 area 0 ! interface Loopback123 ip address 123.45.67.35 255.255.255.240 ! interface Tunnel0 ip address 10.200.0.1 255.255.255.0 no ip redirects ip mtu 1412 ip nhrp map multicast dynamic ip nhrp map 10.200.0.1 201.99.24.2 ip nhrp network-id 321 ip tcp adjust-mss 1312 tunnel source 201.99.24.2 tunnel mode gre multipoint ! interface Ethernet0/0 ip address 201.99.24.2 255.255.255.252 ip nat outside ip virtual-reassembly in crypto map HollyMayaMap ! interface Ethernet0/1 ip address 10.2.124.1 255.255.255.252 ip nat inside ip virtual-reassembly in ip ospf 1 area 0 ! interface Ethernet0/2 ip address 10.2.224.1 255.255.255.252 ip nat inside ip virtual-reassembly in ip ospf 1 area 0 ! router ospf 1 router-id 10.2.24.24 ! router bgp 65002 bgp router-id 10.2.24.24 bgp log-neighbor-changes neighbor 10.2.23.23 remote-as 65002 neighbor 10.2.23.23 update-source Loopback0 neighbor 201.99.24.1 remote-as 29999 ! address-family ipv4 network 123.45.67.32 mask 255.255.255.240 redistribute static neighbor 10.2.23.23 activate neighbor 10.2.23.23 next-hop-self neighbor 201.99.24.1 activate exit-address-family ! ip nat pool R24 123.45.67.36 123.45.67.46 netmask 255.255.255.240 ip nat inside source route-map NAT pool R24 overload ip route 10.7.0.0 255.255.0.0 201.99.70.2 ip route 192.168.0.0 255.255.255.0 10.200.0.71 ! ip access-list extended L2LVPN permit ip 10.0.0.0 0.255.255.255 10.7.0.0 0.0.0.255 ip access-list extended NAT deny ip 10.0.0.0 0.255.255.255 10.7.0.0 0.0.255.255 permit ip 10.0.0.0 0.255.255.255 any ! ! route-map NAT permit 10 match ip address NAT R71: ip dhcp pool User4 host 10.7.100.100 255.0.0.0 client-identifier 01aa.bbcc.0080.00 default-router 10.7.100.1 crypto isakmp policy 10 encr 3des authentication pre-share group 2 crypto isakmp key HollyMaya address 201.99.24.2 ! ! crypto ipsec transform-set esp-aes esp-aes esp-sha-hmac mode tunnel ! ! ! crypto map HollyMayaMap 10 ipsec-isakmp set peer 201.99.24.2 set transform-set esp-aes match address 100 ! interface Loopback0 ip address 10.7.71.71 255.255.255.255 ! interface Tunnel0 ip address 10.200.0.71 255.255.255.0 no ip redirects ip mtu 1412 ip nhrp map multicast 201.99.24.2 ip nhrp map 10.200.0.1 201.99.24.2 ip nhrp network-id 321 ip nhrp nhs 10.200.0.1 ip tcp adjust-mss 1312 tunnel source 192.168.0.100 tunnel mode gre multipoint ! interface Ethernet0/0 mac-address aabb.cc03.6000 ip address dhcp client-id Ethernet0/0 ip nat outside ip virtual-reassembly in crypto map HollyMayaMap ! interface Ethernet0/1 ip address 10.7.100.1 255.255.255.0 ip nat inside ip virtual-reassembly in ! ip nat pool L2LVPNNAT 10.7.0.1 10.7.0.254 netmask 255.255.255.0 ip nat inside source list 101 interface Ethernet0/0 overload ip nat inside source list 102 pool L2LVPNNAT overload ! access-list 100 permit ip 10.7.0.0 0.0.0.255 10.0.0.0 0.255.255.255 access-list 101 deny ip 10.7.0.0 0.0.255.255 10.0.0.0 0.255.255.255 access-list 101 permit ip any any access-list 102 permit ip 10.7.0.0 0.0.255.255 10.0.0.0 0.255.255.255 User 7: User7#ping 10.2.200.100 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.2.200.100, timeout is 2 seconds: ..... Success rate is 0 percent (0/5) User7#tr User7#traceroute 10.2.200.100 Type escape sequence to abort. Tracing the route to 10.2.200.100 VRF info: (vrf in name/id, vrf out name/id) 1 10.7.100.1 0 msec 1 msec 0 msec 2 * * * 3 * * *
  9. Dear All Does any one have below iol images for eve and i want to know which is the stable version of iol images L2 and L3 to run present CCIE R& S labs in EVE-NG. please share L2-ADVENTERPRISE-M-15.2-IRON-20151103.bin L3-ADVENTERPRISEK9-M-15.4-2T.bin Thanks
  10. sk25

    H3 Section2.7 only

    Hi Can anybody explain to me for what task we have to do section 2.7 and how we have to accomplish if we didnt do this task what will be the effect of not doing this part thanks
  11. Change image to below which is stable my cpu is 5% L2-ADVENTERPRISE-M-15.2-IRON-20151103.bin L3-ADVENTERPRISEK9-M-15.4-2T.bin
  12. @ Keen still i didnt done multicast section did you done dmvpn section if yes please share working configs
  13. Section 3.2 DMVPN is not working i configured according to spoto and c4c workbook. did any one face this issue ?
  14. i downloaded eve edition and installed in my laptop. to complete sec 3.4 (lan-lan ip sec ) said R24 has preconfigured for ipsec vpn Hub. but when i console R24 their is no initial config of ipses vpn. If somebody have please upload R24 and R71 initial configs
×
×
  • Create New...