Jump to content

jainn

Banned
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

2 Neutral

About jainn

  • Rank
    Member
  1. Hi Mr Huvoz I too got the same thing but couldn't remember it in so details like you did. You shared exactly what I got in the exam. You done it man. I will definitely help all. And don't worry abt the trollers. Let them not believe and fail the exam. I'll PM you.
  2. jainn

    CCIE LAB Partner

    Is there any new update , Tomorrow is my exam.
  3. thanks for the suggestion. I think I need to correct access list . Also Can u pls specify the exact command line which needs to be advertised in bgp on R24 and R25
  4. Can you pls share the solution for section 2.11 (H2+)
  5. jainn

    H2 section2-4

    Complete mpls section first, as 2.4 section ouput is dependent on mpls section
  6. Thanks for sharing your experience and feedback... This feedback will give me more confidence. My exam is very soon and happy to hear nothing has changed.
  7. Hi frndz, I am not getting output , pls suggest if anything is missing in the config Question : R71 must encrypt and encapsulate traffic towards R24 when any LAN host (10.7.0.0/16) attempts to communicate with any corporate resource (located in 10.0.0.0/8) User7 must be able to ping server2 as shown below: When the crypto session is up , R24 must see the exact same output as shown below: Don’t change any pre-configuration in R24 in order to accomplish this task. You are allowed to configure one static route in one device only in order to achieve the previous requirements. Solution : R24 ------ Configuration interface ethernet0/0 crypto map HollyMayaMap ip route 10.7.0.0 255.255.0.0 201.99.70.2 router bgp 65002 redistribute static crypto dynamic-map HollyMayaDM 10 set peer 201.99.14.1 R71 ------ Configuration ip access-list extended L2LVPN permit ip 10.7.0.0 0.0.0.255 10.0.0.0 0.255.255.255 ip access-list extended NAT deny ip 10.7.0.0 0.0.0.255 10.0.0.0 0.255.255.255 permit ip any 10.0.0.0 0.255.255.255 ip nat inside source list NAT inter ethernet 0/0 overload crypto isakmp policy 10 encr 3des authentication pre-share group 2 crypto isakmp key HollyMaya address 201.99.24.2 crypto ipsec transform-set esp-aes esp-aes esp-sha-hmac mode tunnel crypto map HollyMayaMap 10 ipsec-isakmp set peer 201.99.24.2 set transform-set esp-aes match address L2LVPN interface ethernet 0/0 crypto map HollyMayaMap ip nat outside interface ethernet 0/1 ip nat inside
  8. Try to ping the ip first may be it is not in the same subnet. if the ip is pingable then the problem is different.
  9. Hi, I have applied the solution in section 2.11 multicast in cfg H2+ , completed whole lab properly just not getting output of this multicast section. Suggestions please. Solution : SW3 -Configuration ip multicast-routing interface vlan 34 ip pim sparse-mode exit interface vlan 100 ip pim sparse-mode exit interface vlan 153 ip pim sparse-mode exit interface vlan 173 ip pim sparse-mode exit SW4 -Configuration ip multicast-routing interface vlan 34 ip pim sparse-mode exit interface vlan 100 ip pim sparse-mode exit interface vlan 164 ip pim sparse-mode exit interface vlan 184 ip pim sparse-mode exit R15 -Configuration ip multicast-routing interface loopback 0 ip pim sparse-mode exit interface ethernet 0/0 ip pim sparse-mode exit interface ethernet 0/2 ip pim sparse-mode exit ip pim bsr-candidate loopback 0 ip pim rp-candidate loopback 0 R16 -Configuration ip multicast-routing interface ethernet 0/0 ip pim sparse-mode exit interface ethernet 0/2 ip pim sparse-mode exit R17 -Configuration ip multicast-routing ip multicast-routing vrf Corp interface tunnel 0 ip pim sparse-mode exit interface ethernet 0/0 ip pim sparse-mode exit interface ethernet 0/1 ip pim sparse-mode exit R18 -Configuration ip multicast-routing interface ethernet 0/1 ip pim sparse-mode exit R19 -Configuration ip multicast-routing ip multicast-routing vrf Corp interface tunnel 0 ip pim sparse-mode exit interface ethernet 0/1 ip pim sparse-mode ip igmp join-group 239.1.1.1 exit R20 -Configuration ip multicast-routing ip multicast-routing vrf Corp interface tunnel 0 ip pim sparse-mode exit interface ethernet 0/1 ip pim sparse-mode ip igmp join-group 239.1.1.1 exit   R21 -Configuration ip multicast-routing ip multicast-routing vrf Corp interface tunnel 0 ip pim sparse-mode exit interface ethernet 0/1 ip pim sparse-mode ip igmp join-group 239.1.1.1 exit
×
×
  • Create New...